Universal No-Load LED/Heavy-Duty Flasher by Dakota Digital®
Replaces a conventional flasher for LED lighting and handles up to 25 amps for added lighting loads.
Dakota Digital's LAT-NLF is a no-load replacement flasher designed for vehicles converted to LED lighting and can also serve as a heavy-duty flasher with factory or aftermarket incandescent lamps. The module carries up to 25 amps, allowing additional accessory or trailer lighting loads. Installation replaces the appropriate original turn-signal or hazard flasher and requires the attached black lead to be connected to a solid chassis ground. If socket location or clearance requires it, Dakota Digital allows remote mounting with short pigtail leads and spade connectors. Because many vehicles use separate turn-signal and hazard flashers, verify which original module is being replaced before installation.
• Universal replacement for LED turn-signal/hazard flasher applications
• Also functions as a heavy-duty incandescent-light flasher
• Handles up to 25 amps of current
• Requires attached black wire to solid chassis ground
• Can be remotely mounted with suitable pigtail leads
• Verify turn-signal vs. hazard flasher location before installation
Notes
- This item is not eligible for any further discounts or promotional pricing.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
