Easily upgrade to air conditioning!
Application specific kits are ready for installation!
The HURRICANE® Unit is engineered with a straight through design that does not restrict air flow with bends and turns within the evaporator case. Testing shows that airflow is dramatically improved by pulling the air across the coils. This reduces blower noise and keeps the motor cool, extending service lifetime. Most competitors place the blower fan behind and to the side of the evaporator coil thus pushing the air across the coil surface. This forces the air flow to make radical turns in order to move through the coil fins resulting in excessive back pressure and overall reduction of air volume. Only the HURRICANE® unit features a snap together injection molded case that can be easily disassembled to service system. Competitors units are glued together and cannot be disassembled.
The Inside Package is Easy to install unit that mounts to the firewall with a custom block-off plate using the original heater mounting holes. Adapters connect duct hose to original dash louvers. Heater & A/C hoses will pass through kick panel and blower motor hole block-off plates into the engine compartment.
Inside Package includes:
- Hurricane Heat Cool and Defrost Unit
- Integrated Control Package for Factory AC Control
- Firewall block-off/mounting plates
- Wire Harness
- Louver Kit
- Duct Hose
- Bypass Heater Valve
- Expansion Valve
- Misc Hardware
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
