Original Parts Group Logo
US & Canada Phone Number 1-800-243-8355
International Phone Number 1-562-594-1000
Select Your Vehicle

Selecting your vehicle's make, model, and year allows us to display only parts and items specific to your car's model and year.

 GTO Holiday Sale Savings Promotion Banner
Part fits the following years:1968

RESTOPARTS

GTO Rear Body Panel, 1968

Part# G240102

 

Be the First to Review

SAVE: $18.96 Retail: $201.95

OPGI Price: $182.99

Part Type: (R) = Authentic reproduction of the original GM product
Years: Sold As: EACH
2018 GTO Catalog Page: 220


Perfect reproduction for your GTO, Tempest or LeMans

  • NOTES
  • SHIP NOTE: This item exceeds standard size and is exempt from free shipping. more info
  • SHIP NOTE: This item as packaged measures over 48" in length, and/or 30" in width or height and is subject to an additional handling surcharge of $15.95. more info

This is one of the most easily damaged body panels on a Pontiac A-Body, especially if you've been in a rear end collision. Don't forget about rust too, particularly if you live in the East where they salt the roads in the winter. This is an exact reproduction of the original 1968 lower rear body panel that goes between the quarter panels where the tail lights are located and rolls up into the trunk area. This panel also includes the lower portion of the trunk weatherstrip channel. A perfect reproduction.

Regarding Minor Imperfections In Steel Panels: The sheet metal you receive may have scratches, dings, small dents and other minor imperfections, which are considered normal sheet metal characteristics due to the nature of the product. OPGI does not consider these minor imperfections as damaged. These items will be easily corrected during the filling, priming and sanding phase of your sheet metal installation. All sheet metal panels will require some sort of manipulation during installation. Every panel that we sell is inspected and then carefully packaged to protect against damage that may occur during transit. Test Fit All Panels Prior To Paint and Installation: OPGI recommends test-fitting all sheet metal panels prior to final paint and installation. It is also recommended that the damaged area of the vehicle not be cut out before receiving the new sheet metal. Measure twice, cut once to be safe. Sheet metal panels are not a finished product like door handles and mirrors. Minor modifications including elongating mounting holes, adding shims etc. are normal and may be necessary when installing sheet metal. This is a consideration when reinstalling original GM panels as well as reproductions. It is important to note that hard driving conditions can twist frames and bodies out of original tolerances. Poor bodywork from previous collisions can cause problems with the body structures that the panels are attached to.

Make & ModelYear RangeApplication Details
Pontiac GTO1968
Pontiac LeMans1968
Pontiac Tempest1968
California Prop 65 Icon WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Low Stock Alert!
Only a few left in stock.
Available for immediate delivery.
Point Coins Earn 182 points more info
Switch to Mobile Site »

Original Parts Group

Special Deals!
Never Miss A Promotion
×
If you see this, please contact your IT department and ask them to unblock www.opgi-static.com