5-Inch Comp II LED Programmable Speedometer (0-160 MPH) by Marshall Instruments™
One-mile push-button calibration matches the speedometer to your tire size and axle ratio.
This 5-inch Comp II LED speedometer by Marshall Instruments™ combines an analog 0-160-MPH display with stepper-motor operation, an odometer and two resettable trip meters. Through-the-dial LED lighting and a glowing pointer keep the scale visible at night. The speedometer can be calibrated by driving one measured mile and pressing the calibration button, allowing it to be set for the vehicle's tire size and axle ratio. It accepts signals from compatible GPS, Hall-effect and magnetic speed senders; the sender signal must be at least 3 volts peak-to-peak. The factory setting is 16,000 pulses per mile, with a programmable range of 4,000-200,000 pulses per mile. Choose a black or white dial with a silver aluminum, black, polished stainless steel or polished stainless steel step bezel to match your other instruments. A rear U-clamp secures the gauge in the dash.
• 5-inch electronic speedometer; 0-160 MPH
• Stepper-motor movement with analog pointer
• Odometer and two resettable trip meters
• One-mile push-button speed calibration
• 4,000-200,000 pulses per mile; preset to 16,000
• Compatible GPS, Hall-effect or magnetic speed signal; 3V minimum peak-to-peak
• Through-dial LED lighting and illuminated pointer
• Black or white dial; four bezel choices
• Rear U-clamp mounting
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.