3-3/8-Inch Comp II LED Electronic Speedometer (0-160 MPH) by Marshall Instruments™
Programmable speed calibration with an odometer and two trip meters in a full-sweep display.
This Marshall Instruments™ Comp II LED 3-3/8-inch speedometer combines a full-sweep 0-160-MPH stepper-motor display with an odometer and two trip meters. The included programming button calibrates the instrument over a measured mile or adjusts its pulses-per-mile setting to match the speed signal. It accepts 4,000-200,000 pulses per mile and is initially set to 16,000. Through-the-dial illumination and the lit pointer keep the reading visible at night. Select a black or white face and the bezel finish to match your other instruments. A compatible vehicle-speed, Hall-effect or GPS-derived signal is required.
• 3-3/8-inch full-sweep electronic speedometer; 0-160 MPH
• Stepper-motor movement with through-the-dial LED lighting
• Odometer and two trip meters
• Programmable range: 4,000-200,000 pulses per mile
• Factory setting: 16,000 pulses per mile
• Included button for measured-mile or pulse-setting calibration
• Compatible speed-sensor signal required; minimum 3-volt peak-to-peak input
Notes
- This item is not eligible for any further discounts or promotional pricing.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
