1-1/2-Inch White-Dial Liquid-Filled Pressure Gauge by Marshall Instruments™
Silicone fill damps pointer vibration; a center-back 1/8-inch NPT fitting keeps the gauge compact.
This compact Marshall Instruments™ pressure gauge uses a white dial with the Marshall logo and a red pointer with a silicone-filled stainless steel case to damp pointer movement from vibration. Brass internal parts connect to a 1/8-inch NPT center-back fitting, and an acrylic lens protects the dial. The nominal 1-1/2-inch gauge has a 1.6-inch case and 1.75-inch bezel, so allow for the bezel diameter when planning the installation. Choose the pressure range required: 0-15, 0-30, 0-60, 0-100 or 0-1,500 PSI. The 0-1,500-PSI option is a high-pressure nitrous gauge; it is not the low-pressure fuel-gauge version.
• Nominal 1-1/2-inch gauge; 1.6-inch case and 1.75-inch bezel
• Silicone-filled stainless steel case with brass internals
• Acrylic lens and 1/8-inch NPT center-back fitting
• Available scales: 0-15, 0-30, 0-60, 0-100 or 0-1,500 PSI
• White dial with the Marshall logo and a red pointer
• 0-1,500-PSI option is intended for nitrous pressure
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
