1-1/2-Inch Black Marshall-Logo Dry Pressure Gauge by Marshall Instruments™
Dry Bourdon-tube pressure measurement with a 1/8-inch NPT center-back connection.
This 1-1/2-inch Marshall Instruments™ mechanical pressure gauge provides a direct reading at the measurement point. The dry bronze Bourdon-tube movement reads pressure without liquid filling. A steel case, brass internals and acrylic lens protect the mechanism; the case measures 1.6 inches in diameter and the bezel measures 1.625 inches. A 1/8-inch NPT center-back connection threads into a compatible pressure port. The black Marshall-logo dial has a white pointer and a chrome-finished case and bezel. Choose the pressure range for the system being measured: 0-15, 0-30, 0-60, 0-100, 0-1,500 PSI. This is a mechanical instrument; it does not require an electrical pressure sender.
• 1-1/2-inch direct-mount mechanical pressure gauge
• Black Marshall-Logo dial with white pointer
• Available ranges: 0-15, 0-30, 0-60, 0-100, 0-1,500 PSI
• 1/8-inch NPT center-back connection
• Dry bronze Bourdon-tube movement
• Steel case; brass internals and acrylic lens
• 1.6-inch case; 1.625-inch bezel
• Chrome-finished case and bezel
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
