Eddie Motorsports power steering hardlines are used on GM type II power steering pumps with attached reservoirs. These stainless steel power steering hardlines are available in a long or short option. The long hardline wraps around the top of the reservoir whereas the short hardline wraps around the side of the reservoir. The integral banjo fitting has 16.5mm x 1.5 threads and the line includes a nut and ferrule for attaching AN-6 Teflon lined braided stainless steel hose. Eddie Motorsports also offers power steering pump fittings and hardware for GM type II power steering pumps only. High flow pressure fitting accepts fittings with 16.5mm x 1.5 threads, internal orifice is .150" and allows pump to flow 3 -3.5 gallons per minute @ 1500 psi for use with Eddie Motorsports pumps used with GM power steering gear boxes. Low flow pressure fitting accepts fittings with 16.5mm x 1.5 threads, internal orifice is .120" and allows pump to flow 1.5 - 2 gallons per minute @ 1200 psi for use with Eddie Motorsports pumps used with rack and pinion steering systems.