GM® Type II Power Steering Low-Flow Pressure Fitting by Eddie Motorsports®
A calibrated orifice matches the pump output to the intended steering system.
This low-flow pressure fitting is for Eddie Motorsports® GM® Type II power steering pumps used with rack-and-pinion steering. Its 0.120-inch internal orifice provides the manufacturer-specified flow of 1.5–2 gallons per minute at 1,200 psi. Select the fitting for the pump and steering configuration; the high- and low-flow versions serve different steering systems.
• GM® Type II steering pumps
• 0.120-inch internal orifice size
• 1.5–2 gallons per minute at 1,200 psi
• For rack-and-pinion steering
• Calibrated pressure-fitting replacement part
Notes
- Short hardline is only compatible with hose with a .030" wall thickness.
- This item is not eligible for any further discounts or promotional pricing.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
