5-Foot Super Duty Race Shifter Cable by B&M®
Pre-lubricated cable with rotary-swaged ends, a 3/8-inch jacket and low-backlash operation.
This B&M® Super Duty race cable uses a red, 0.375-inch long-lay thermoplastic outer jacket and rotary-swaged end fittings to transmit shifter movement with less than 0.015 inch of backlash per foot. The five-foot cable has an eyelet at one end and a 10-32 threaded stud at the other, with double jam nuts and internal locking washers for mounting. Its spiral-wound steel inner cable is pre-lubricated, provides a 2.5-inch stroke and is intended for compatible 1981-and-newer B&M® shifters.
• Five-foot cable with red 0.375-inch outer jacket
• Rotary-swaged eyelet and 10-32 threaded ends
• Less than 0.015-inch backlash per foot
• 2.5-inch operating stroke; pre-lubricated cable
• 1,000-pound pull strength; spiral-wound steel inner cable
• Double jam nuts and internal locking washers included
• Compatible 1981-and-newer B&M® shifters
Notes
- Works on all B&M shifters except the Unimatic.
- This item is not eligible for any further discounts or promotional pricing.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
