5-Foot Red Performance Shifter Cable by B&M®
A pre-lubricated cable with a long-lay jacket, single eyelet and 10-32 threaded transmission end.
This 5-foot B&M® Performance cable is a replacement for compatible B&M® street shifters manufactured from 1981 onward. The pre-lubricated steel inner cable runs inside a 0.250-inch-diameter red thermoplastic long-lay jacket, designed to resist kinking and control backlash. It has a single-eyelet shifter end, a 10-32 threaded transmission end and 2.5 inches of travel. Swaged end fittings, jam nuts and locking washers secure the cable during installation.
• 5-foot cable with red outer jacket
• Compatible B&M® street shifters from 1981 onward
• 0.250-inch thermoplastic long-lay housing
• Pre-lubricated spiral-wound steel inner cable
• Single-eyelet and 10-32 threaded ends
• 2.5-inch cable travel; swaged mounting fittings
Notes
- Works on most B&M shifters except for the Unimatic and the Quicksilver (with console) series shifters.
- This item is not eligible for any further discounts or promotional pricing.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
