Transmission Slip Yoke (32-Spline, TH400 / Matching Muncie, 1310 or 3R Joint)
Choose joint series and 5.50- or 6.75-inch centerline-to-end length
These 32-spline slip yokes fit matching TH400 and Muncie transmission outputs. Choose the version that matches the driveshaft joint and required working length.
SY1310-4000 uses a 1310 joint and measures 5.50 inches from joint centerline to spline end. SY3R-4000 uses a 3R joint at the same length. SY3R-4120 uses a 3R joint at 6.75 inches, with a counterbore for an output-shaft O-ring. The 1310 version uses outside snap rings; the 3R versions use inside snap rings.
FEATURES
• 32-spline transmission output
• TH400 or matching 32-spline Muncie
• SY1310-4000: 1310, outside rings, 5.50 inches
• SY3R-4000: 3R, inside rings, 5.50 inches
• SY3R-4120: 3R, inside rings, 6.75 inches
• Lengths measured from joint centerline to spline end
• SY3R-4120 has output-shaft O-ring counterbore
Notes
- OSR = Outside Snap Ring (1310 U-Joint), and ISR = Inside Snap Ring (3R U-Joint)
- The 32-spline yoke fits the TH400, ’70 Muncie M22 and all ’71-74 Muncies.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
