1965–67 Cadillac V8 Original-Style Radiator (No Trans Cooler) by US Radiator®
Copper/brass standard core with 1/2-inch tubes on 9/16-inch centers.
This radiator uses a copper/brass standard automotive core with 1/2-inch tubes on 9/16-inch centers. The original-style tanks and mounting layout suit a stock cooling-system installation. The crossflow layout uses 1-1/2-inch inlet and 1-3/4-inch outlet connections. Core dimensions are 17 × 28-3/8 inches. The driver-side mount is 2-3/4 inches wide, and the passenger-side mount is 3-1/2 inches wide. There is no built-in transmission cooler; an automatic transmission requires a separate cooler. The filler neck is positioned on the passenger side.
• Copper/brass standard automotive core
• 1/2-inch tubes on 9/16-inch centers
• Crossflow coolant-flow layout
• Inlet: 1-1/2 inches; outlet: 1-3/4 inches
• Core dimensions: 17 × 28-3/8 inches
• Driver-side mount width: 2-3/4 inches; passenger-side mount width: 3-1/2 inches
• No built-in automatic-transmission cooler
• Passenger-side radiator filler neck
• Radiator cap and petcock not included
• 1 Year Limited Warranty
• Reproduced to OE Specifications
Notes
- The radiator petcock is sold separately, part# FJ78800.
- Radiator cap is not included.
- 1959-60 upper tank is not 100% original, but is a very close reproduction.
- This item is Oversize 3, and is excluded from free ground shipping.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
