1964-77 Chevelle Crate Engine, H.O. 350CI/330 Horsepower

Fuel-efficient high-performance

• NOTES
• SHIP NOTE: This item exceeds standard size and is exempt from free shipping. 

  Items Exempt from Free Shipping

  Certain items which exceed standard size are exempt from free shipping promotions. These items are noted in your cart at checkout.

• SHIP NOTE: This item cannot be shipped FedEx Ground and requires Truck Freight Delivery which must be prepaid by credit or check (no C.O.D). Please call or email us for an exact quote. 

  Items That Require Truck Freight Delivery

  Products that require truck freight delivery are items too large to be shipped via FedEx Ground. These are items such as fenders, hoods, etc. All truck freight orders must be prepaid. Rates begin at $120.00 and vary based on weight. Please contact our customer service department for accurate freight charges or visit our website at opgi.com.

• SHIP NOTE: This item is SPECIAL ORDER and will be drop-shipped from the manufacturer. 

  Drop Ship

  All drop-shipped orders must be prepaid. Rates vary depending upon weight.

This special performance 350CI/330 HP engine has a modest 9:1 compression ratio. It is ideal for today's street machines, with performance of the 1960s and fuel availability of the 1990s in mind. This budget-minded performer includes a 4-bolt main block, 64cc heads, hydraulic camshaft and forged connecting rods. It is delivered as a long block (with valve covers) leaving you with your choice of intake, exhaust, ignition, carburetor, etc. Requires the use of Vortec intake.

TECHNICAL INFORMATION: Horsepower: 330 @ 5000 rpm Torque (ft./lbs.): 380 @ 3800 rpm Maximum rpm: 5500 Compression ratio: 9:1 Cast-iron block with 4-bolt main caps Nodular iron crankshaft Connecting rod: Powdered metal steel Cast aluminum pistons Camshaft-type: Hydraulic flat tappet Lift (in): .435 intake/.460 exhaust Duration (@.050 in): 212° intake/222° exhaust Cylinder heads: Vortec iron; 64cc chambers Valve size (in)- intake: 1.94 exhaust: 1.50 Stamped steel rocker arms Rocker arm ratio: 1.5:1 Ignition timing: 10° BTDC @ 700 rpm IMPORTANT: Requires the use of an 1986 or newer counter-weighted flywheel.