1968-72 A-Body Manual Steering w/Keyed Column Rack & Pinion by Flaming River
Manual rack-and-pinion conversion uses the Travelbar system to reduce bump steer.
Convert the original steering linkage to a Flaming River rack-and-pinion system engineered for classic GM A-Body geometry. The Travelbar connects tubular inner tie rods at the original pivot points to help reduce bump steer, while the cradle is jig-welded for consistent alignment and designed for bolt-in installation.
• Manual rack-and-pinion steering
• Travelbar inner tie rod system
• Designed to reduce bump steer
• Jig-welded mounting cradle
• Bolt-in conversion design
• Keyed tilt column configuration
Notes
- Steering column and power steering accessories are only included in applicable kits.
- Power steering hoses sold separately (OPGI # CH27662).
- Requires the use of 1964-70-style outer tie rods and sleeves.
- 1968 and below vehicles do not have OE keyed columns.
- This item is not eligible for any further discounts or promotional pricing.
- This item is Oversize 3, and is excluded from free ground shipping.
- This item is SPECIAL ORDER and will drop-ship from the manufacturer. While the majority of drop ship orders experience no delays, please be advised that OPGI does not control delivery times.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
