Fastener Set, Master Chassis, 1970 CHEVELLE/EL CAMINO, BB, DISC BRAKE

1970 Chevelle & El Camino Chassis Fastener Kit (396/454, Front Disc Brakes)

Factory-correct chassis hardware comes labeled by assembly to simplify an authentic build.

Give your 1970 Chevelle or El Camino chassis the factory-correct details that finish a careful build. This kit combines mounting fasteners for the suspension, steering, brakes and drivetrain with front sway-bar end-link bushings and grease fittings. Original-style profiles, head markings and finishes preserve the appearance at the mounting points. Labeled groups include factory assembly-manual page references and parts-book group numbers, helping you identify where the hardware belongs and spend less time sorting loose fasteners. This version is configured for 396 or 454 big block engines and front disc brakes. The included differential-cover screws suit a 12-bolt housing. Sold as one chassis fastener kit.

• 1970 Chevelle and El Camino; 396 or 454 big block engines; front disc brakes • Front control-arm hardware: upper-arm Grade 8 knurled bolts, lock nuts and alignment shims; lower-arm pointed bolts and lock nuts; upper cross-shaft retainers, bolts and washers • Rear control-arm hardware: Grade 8 bolts and lock nuts; hardened reinforcement washers • Sway-bar components: front bracket screws; front end-link bolts, retainers, bushings and nuts; rear mounting bolts and nuts • Shock mounting fasteners: front lower mounting screws and U-nuts; rear mounting bolts, lock nuts and washers • Suspension bump-stop fasteners: front attaching nuts; rear bumper/bracket bolts, nuts and lock washers • Steering attachment hardware: idler-arm Grade 8 bolts, washers and nuts; steering-box Grade 8 bolts and flat washers; pitman-arm nut and lock washer; rag-joint 12-point bolt; shaft-coupling nuts and lock washers • Linkage fasteners and grease fittings: linkage and ball-joint slotted nuts with cotter pins; 10 straight grease fittings • Front brake mounting hardware: caliper-bracket and shield bolts with lock nuts; caliper locating bolts, 3.70 inches long • Brake-hose and line attachments: front hose-bracket screws; hose retaining clips; front line-bracket screws • Brake distribution-block fasteners: front frame attaching screw; rear bracket attaching bolt • Booster and master-cylinder hardware: booster flange nuts; booster-hose clamps and tube-bracket nut; master-cylinder flange nuts; pushrod-to-pedal retaining clip; master-cylinder balance-valve attaching screw • Wheel-cylinder and axle-retainer fasteners: four screws for two wheel cylinders; axle-retainer Grade 8 bolts, nuts and lock washers • Parking-brake hardware: cable retainers and nuts; control attaching screws, flange nuts and sealer • Engine-mount fasteners: pointed through-bolts, washers and lock nuts; block attaching bolts with captive lock washers; frame attaching bolts, washers and nuts • Transmission mounting hardware: crossmember bolts, washers and nuts; mount bolts with flat and lock washers, including TH400 hardware • Speedometer-cable retainers: transmission retainer and attaching screw • Differential-cover fasteners: 12 screws for a 12-bolt cover • Driveshaft retaining hardware: retaining straps with 1.56-inch hole spacing and flange bolts • Fuel-tank hardware: special attaching bolts, screws and U-nuts • Fuel-hose and vapor-system attachments: black and silver fuel-hose spring clamps; return-line hose clamps; vapor-line hose clamps; vapor-canister attaching screws • Dual-exhaust hanger fasteners: attaching screws and retainers • Accelerator and clutch attachment hardware: accelerator-lever support screws; clutch bellcrank bracket screws • Original-style head markings, profiles and finishes • Labeled groups reference assembly-manual pages and parts-book sections