1964–68 GM A-Body Front Lower Control Arm Rear Bushing (1-7/8 in.)
Bonded rubber and a steel sleeve help isolate road vibration at the lower control arm pivot.
This front lower control arm rear bushing uses a rubber element bonded to steel to cushion road vibration while allowing the control arm to pivot normally. The 1-7/8-inch outside diameter and 2-3/8-inch length identify this larger round bushing for the original-style suspension. Its rubber-and-steel design is a useful choice when replacing worn, cracked or hardened bushings during a front suspension rebuild. Applications include 1964–67 Chevelle and El Camino, 1964–65 Buick Skylark and Oldsmobile Cutlass, and 1964–68 Pontiac GTO, LeMans and Tempest.
Features
• Rear bushing in front lower control arm
• 1-7/8-inch outside diameter; 2-3/8-inch length
• Rubber-and-steel bushing with 1/2-inch bore
• Sold as one control arm bushing
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
