Improve your vehicle's fuel economy

Includes throttle and transmission kickdown bracket

Introducing Sniper EFI Quadrajet™. The first bolt on spread bore electronic fuel injected throttle body system that does not require any additional adapters, sealing plates, or intake manifold swaps! The Sniper EFI Rochester Quadrajet™ (Q-Jet) system retains the same great features as the 4150 Sniper EFI version such as; four 100lb./hr. Injectors, built in timing control, a 3.5" full color touchscreen and much more! The throttle body will support up to 500 horsepower naturally aspirated. In addition to all of these great tried and true features, the Sniper EFI Rochester Quadrajet™ (Q-Jet) system will fit most stock air cleaners and offers multiple fuel inlet configurations that allow for a stock appearing installation!

Features: - Throttle body mounted ECU – no extra boxes to mount - Supports up to 500hp with Four 100 lb./hr. Injectors! - Only 4 Wiring Connections Required (Battery +, Battery - , Switched Ignition & RPM) - Integrated ignition timing control - Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 - Brake Booster adapter included, if required - Universal Throttle and transmission kickdown bracket included - High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays. - Simple Calibration Wizard (Answer a few questions about your engine and it creates the base map, then starts tuning on its own) - Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI - The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn - OEM Style Throttle Position Sensor (TPS)/ and Idle Air Control (IAC) for years of dependable service. - Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange - Requires external fuel pressure regulator, such as: 12-886 or 12-879 Master Kit Includes: • Sniper EFI Throttle Body Assembly • Main Harness and Ignition Adapter • Bosch Wide Band Oxygen Sensor • Coolant Temperature Sensor • Air Cleaner Gasket • 3.5” Touch Screen Controller • Output Harness • 1 - Fuel Pump • 20FT- 3/8"" EFI Vapor Guard Hose • 13 - 3/8"" Vapor Guard Hose Clamps • 1 - Post Fuel Filter • 1 - Pre Fuel Filter • 3 - -6ST to 3/8"" hose end • 1 - fuel cuff • 1 - 2/pk Dowty washer • 2 - -6 bulkhead nut • 1 - -6 90 DG Bulkhead fitting • 2 - 3/8""NPT to 3/8"" Vapor Guard fitting • 1 - 3/8""NPT hex plug • 1 - EFI fuel pressure regulator