Disc Brake Set, Frt, Wilwood Forged Dynalite Pro, 1964-72 A-Body, 11.00" Rtrs

1964-72 GM A-Body Forged Dynalite Pro Front Disc Brake Kit (11" Rotors, 4-Piston Calipers) by Wilwood®

Four-piston forged-aluminum calipers, 11-inch vented rotors and aluminum hubs

Upgrade the front brakes on your 1964-72 GM A-Body with this Wilwood® Forged Dynalite Pro kit. The package includes four-piston forged-aluminum calipers, brake pads, two 11-inch vented iron rotors, aluminum hubs, wheel bearings, grease seals, caliper brackets and mounting hardware. Choose undrilled or drilled-and-slotted rotors with black or red powder-coated calipers. It works with the compatible original drum- or disc-brake spindles. Wheel position changes +0.19 inch per side from the original drum-brake position or -0.31 inch per side from the original disc-brake position. The hubs use 1/2-20 wheel studs. New spindles, a master cylinder and a booster are not included. Flex hoses are also required; Wilwood lists hose kit 220-7056 for this brake kit. Check the wheel-clearance diagram before ordering.

• Front rotors: 11-inch diameter x 0.81-inch thick, vented iron • Calipers: four-piston forged aluminum; black or red powder coat • Rotor options: undrilled or drilled and slotted • Hub bolt pattern: 5 x 4.5 and 5 x 4.75 inches • Wheel studs: 1/2-20 • Wheel offset change: +0.19 inch from drum / -0.31 inch from disc, per side • Flex hoses: not included; Wilwood® reference 220-7056 • Spindles, master cylinder and booster: not included • Wheel clearance: some 14-inch wheels may fit; check Wilwood’s template