1967 GM A-Body Front Disc Brake Kit, 2-Inch-Drop Spindles by CPP®
11-inch plain-face vented rotors, 2-inch-drop spindles and a 11-inch vacuum booster.
Convert your 1967 GM A-Body to power front disc brakes with this CPP kit. It combines 2-inch-drop disc-brake spindles, two 11-inch plain-face vented rotors and loaded single-piston cast-iron calipers with brake pads. The spindles lower the front of the vehicle 2 inches. The wheel bolt pattern is 5 x 4.75 inches.
The wheel-end equipment includes caliper brackets, dust shields, inner and outer bearings, grease seals, dust caps, spindle hardware and rubber flexible hoses. The power-brake package adds a gold-finish 11-inch single-diaphragm vacuum booster, a cast-iron master cylinder with a 1-1/8-inch bore, a proportioning valve, pedal-extension rod and installation hardware. A front brake-line conversion kit is included. Choose the engine/model option for the correct line routing. The spindle assemblies accept the original ball joints and tie-rod ends. Check steering-arm mounting holes and clearance with 15-inch or larger disc-brake-compatible wheels before installation.
• Front conversion for 1967 GM A-Body applications
• 11-inch plain-face vented rotors
• 2-inch-drop disc-brake spindles
• Single-piston calipers
• 11-inch vacuum brake booster with master cylinder and proportioning valve
• Rubber flexible brake hoses
• Includes brackets, dust shields, bearings, seals and brake lines
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
