1964–67 Chevrolet A-Body 11-Inch Rear Disc Brake Conversion Kit by CPP®
Standard rear disc conversion with plain vented rotors and caliper-operated mechanical parking brakes.
Convert the rear drums on your 1964–67 Chevelle or El Camino with this CPP standard rear disc kit for the factory Chevrolet 10- or 12-bolt axle. Two 11-inch plain-face vented rotors work with single-piston cast-iron calipers that incorporate mechanical parking-brake levers. The wheel bolt pattern is 5 x 4.75 inches.
The kit includes the rotors, rear calipers, caliper-mounting brackets, rubber flexible brake hoses, rear axle hard lines, line-mounting tabs, universal cut-to-fit parking-brake cables, differential-cover gaskets and mounting hardware. Fit and adjust the parking-brake cables during installation to retain the mechanical parking-brake function.
Use 15-inch or larger disc-brake-compatible wheels. C-clip eliminators may require modifications or additional shims for caliper alignment. The vehicle’s master cylinder and proportioning valve must be suitable for the completed front/rear brake combination.
• Rear conversion for the listed Chevrolet applications
• Fits the factory Chevrolet 10- or 12-bolt rear-axle configuration
• 11-inch plain-face vented rotors
• Single-piston cast-iron calipers with mechanical parking brakes
• Rubber flexible hoses, rear axle hard lines and parking-brake cables
• 5 x 4.75-inch wheel bolt pattern
• Requires 15-inch or larger disc-brake-compatible wheels
• Includes caliper brackets, line-mounting tabs, differential-cover gaskets and hardware
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
