1964-72 GM A-Body Front Disc Brake Kit (13" Rotors, Stock-Height Spindles, C7 Hubs) by CPP®
Corvette-style spindles, sealed C7 hubs and twin-piston calipers with 13-inch rotors
Upgrade the front brakes on your 1964–72 GM A-Body with CPP® Corvette-style stock-height tall spindles and C7 sealed-bearing hubs. The tall-spindle design improves camber change through suspension travel while retaining the original drum-brake wheel offset. The kit includes two 13-inch zinc-coated, dimple-drilled and slotted rotors; loaded aluminum calipers with two 42 mm pistons each; C7 hub assemblies with 1/2-20 x 2-inch screw-in wheel studs; stainless steel brake hoses; and mounting hardware. Choose black or red powder-coated calipers. The sealed hub-bearing arrangement reduces the spindle-pin flex associated with caliper piston push-back. Rotor dimples do not pass through the disc. This front wheel kit does not include a booster or master cylinder. The bolt pattern is 5 x 4.75 inches, and at least 17-inch wheels are required; check actual wheel and caliper clearance.
• Front rotors: 13-inch, zinc-coated, dimple-drilled and slotted
• Spindles: stock-height tall design, ductile iron
• Hubs: C7-style sealed bearings; 1/2-20 x 2-inch screw-in studs
• Calipers: aluminum, two 42 mm pistons each; black or red powder coat
• Hoses: stainless steel
• Wheel bolt pattern: 5 x 4.75 inches
• Minimum wheel diameter: 17 inches; verify clearance
• Booster and master cylinder: not included
Notes
- This kit utilizes a 13” rotor and require a minimum 17” wheel.
- This item is not eligible for any further discounts or promotional pricing.
- This item is Oversize 3, and is excluded from free ground shipping.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
