Aeromotive's in-line fuel filters are made from anodized aluminum and are available in a variety of finishes with all of the precise machining that you expect when purchasing Aeromotive products. These fuel filters are an inexpensive insurance policy to make sure that your fuel system is clean and the performance you expect from your engine is not diminished. Aeromotive has made these fuel filters to run on anything from 200 horsepower to an astounding 3000 horsepower. These high-flow filters are available in NPT, ORB, AN and canister styles, with your choice of a 100, 40 or 10 micron filter. The 100 micron in-line filters include a stainless steel cleanable element that is meant to be used between the fuel tank and the fuel pump to protect the pump. The 40 micron in-line filters include a fabric filter element and the 10 micron in-line filters include a cellulose filter element that are meant to run after the fuel pump to protect your injectors or carburetor. Aeromotive also offers replacements O-rings for use with your Aeromotive fuel filters. Whenever you change your fuel filter element, install new O-rings to ensure a positive, leak-free seal from the filter to your fuel lines.