1973–77 GM A-Body Rear Quarter Floor Pan Section, LH or RH
USA-made stamped-steel rear floor panel with formed factory-style ribs and EDP protective coating.
This USA-made stamped-steel rear quarter floor section features formed ribs and contours matching the original rear footwell panel design. Its EDP-coated surface provides protection during storage and preparation before final finishing. Available for LH or RH installation, with different panel dimensions for each side: the LH panel is approximately 22 in. wide at the front and 13-1/2 in. at the rear; the RH panel is approximately 21 in. wide at the front and 12-1/2 in. at the rear. The panels are also available as a discounted LH/RH pair, see SKU #32P1514-PR.
Features
• Stamped-steel rear floor panel with formed floor ribs
• Black EDP-coated finish for pre-installation corrosion protection
• LH: approx. 22 in. front width, 13-1/2 in. rear width
• RH: approx. 21 in. front width, 12-1/2 in. rear width
• Made in USA; companion pair SKU #32P1514-PR
Notes
- This item is Oversize 1, and is excluded from free ground shipping.
WARNING: This product can expose you to chemicals including lead, sulfur, nickel, chromium, vanadium, titanium, polyvinyl chloride, and 4,4’-methylenebis (2-chloroaniline), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
