Seals to the inner fenderwell. Included with this set are 2 replacement A-arm seals and enough heavy-duty staples for mounting to original holes in fenderwell. Will keep road tar and dust from shootin...

Strong and quick-drying for metal or plastic emblem application. Can also be used to bond lenses, vinyl, or interior plastic.

Regular-strength adhesive bonds all types of weatherstrip to metal.

Used to install hood insulation, carpeting, vinyl tops, etc... Spray on and tack dry.

The ultimate weatherstrip adhesive for bonding rubber products to metal. Black coloring blends in with weatherstrip and makes cleanup a snap.

3/8" x 15', auto glass replacement kit. Includes setting blocks. One set does front or rear window.

This is the weatherstrip piece that sits on the front of the convertible top and seals it to the header when the top is up.

Our roof rail weatherstripping kits exceed the specifications of the factory originals in fit and appearance. These kits feature the correctly-reproduced steel insert "backbone" to ensure an air-tight...

These are identical reproductions of the original GM weather-strips. Each extruded rubber section features original GM-style fasteners for ease of installation.

This felt weatherstrip runs the length of the glass channel, from down in the door, around the upper frame (where the window rolls up into it) then back down the other side into the door.

1966-'67 front fender cap seals are used as anti-squeak and water-preventative seals. Should be replaced when painting your car. Same for '70-'72 rear.

Dynamat's high heat hoodliner's "sound soaker" foam construction absorbs engine noise up to 50%. This also cuts the heat up to 97% to help protect your paint finish. This is a simple "peel and stick" ...

We have all the good factory-correct hood-to-fender bumpers for all the 1964-'72 Cutlass models. These are the bumpers that fit on the fenders and go between the fender and hood when the hood is close...

These quality reproductions are molded rubber, just like the factory originals. We take pride not only in the quality and performance, but also in the "showroom new" look after installation. Road whis...

Vertical strip installs into quarter window chrome. For coupe or convertible. The non-steel insert type is a good economical choice, while the steel insert will give you added durability and longevity...

This exclusive 3M formula will soften adhesive bonds between weatherstrip and metal for ease of disassembly.

The best quality reproduction available. Durable molded extrusion insures exact fit and texture with identical to factory molded ends and hardware.

These fit 2- and 4-door "A" body hardtops.

These are the authentically-reproduced weatherstrip seals that go on the leading edge of the window cowl where the hood meets the edge, as well as the rear edge of the hood. On 1968-'72 models, two se...

Light-colored, heavy-based sealer, especially designed for use on vertical seams. Heavier-bodied consistency. Up to 1/8" bead can be applied easily. Excellent adhesion to metal, paint, glass, rubber, ...

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

These kits are available with either original-style window felts (round, stainless steel bead) or reproduction-style window felts (flat, 1/4" bead); your choice!

Soft, non-hardening black caulking material in one-foot lengths for use in all types of seams, joints and openings. Easily thumbed into place and smoothed with finger, it is then immediately paintable...

This quality reproduction for Cutlass is identical to the original factory extrusion.

Exact replacement flame-resistant fiberglass formed material. Machine-stamped identical to factory original for an exact fit and look. Quiets engine noise and absorbs heat.

These U-shaped, molded-rubber seals are professionally injection-molded (unlike others found elsewhere). Our process is identical to the original produced by GM.

These exact reproductions feature a durable compression molded rubber with original style steel insert cores. Nothing is left to compromise in these precision engineered reproductions.

Includes all 8 "sweeper-felt strips" for door and quarter horizontal channels (where window glides up and down).

These complete window felt kits are manufactured to identical OEM specifications. They utilize the original-style mounting clips for simple installation. Complete 8 unit set. These are a reproduction.

This felt weatherstrip fits into vertical channel behind the vent window. Includes molded end-tips at top for exact fit. Fits coupe and convertible models.